Swimming pool and spa filter cartridge for water filtration

Group Pool&Spa Filter
Min. Order 500 piece
Terms of Payment L/C, Western Union, T/T, Paypal
Update Time 2017-12-18
Item specifics
Outside Diameter:65mm,68mm,110mm,114mm
Filter medium:Pleated Depth PP, Polyester
Support/Drainage and End caps :Polypropylene (PP)
Adjustable flange :Polypropylene (PP)
Seal Material :EPDM, NBR
Removal Rating:0.5, 1, 3, 5, 10, 20, 40, 70, 100, 120µm
Maximum Operating Temperature:80°C
Maximum Differential Pressure:3.4Bar, 60°C
Itemswimming pool filter
  • Description
  • Product review
Swimming pool and spa filter cartridge for water filtration


Swimming pool filter cartridge is made of advanced synthetic pleated polyester filtration technology for a larger filter surface area, longer cartridge life, higher flow rate, greater dirt holding capacity, lower pressure drop, and more efficient sediment filtration when compared to other sediment filters. The 100% synthetic cellulose-free pleated polyester media does not contain binders or additives. Additionally, this sediment pleated filter is able to be cleaned and reused between cartridge change-outs to reduce filter replacement costs.Besides, filter media, center pole, end cover as an integral part of the glued together to ensure the end cover sealing better. And due to the folding design provides greater filtration area, providing large filter area, long service life, reducing the filter update times and cost of filtration.



Outside Diameter:




370mm for size 1 bag

634mm for size 2 bag

Filter medium:

Pleated Depth PP, Polyester

Support/Drainage and End caps :

Polypropylene (PP)

Adjustable flange  : 

Polypropylene (PP)

Seal Material :


Removal Rating: 

0.5, 1, 3, 5, 10, 20, 40, 70, 100, 120µm 

Maximum Operating Temperature: 


Maximum Differential Pressure:

3.4Bar, 60°C

Recommended Change out Differential Pressure:

2.4Bar, 20°C.



Pleated design increased surface area and contaminant removal

-- Longer filtration runs for fewer change-out and less maintenance

-- Low pressure drop

-- Designed for general water filtration purposes


Swimming Pool water filter used imported paper, PCcore, filter element with high precision, large flow, pollutant carrying capacity, the initial resistance is small and suitable for all kinds of water filtration swimming pools and ponds.

   Multi-fold standard pool filter using polyester fiber filter media, with good mechanical properties and solar, and the center pin glued together from cover, folding design, filtration area increases, the overall gluing, cover seal good, high tensile strength, multi-fold filter with a long filter life, less the number of replacement filter cost and low cost, is widely used in resins, inks, paints, adhesives, purification, chemical agents, electroplating filtration, solvent and pharmaceutical filtration, filtration in food and beverage industries, particularly those with more widely used in swimming pool filters, also known as the pool filter.

The Cleaning Method of the Filter


Step 1. Lift the pool filter cartridge straight up to remove it from the pool filter body.

Step 2. Set the filter cartridge on the lawn and begin cleaning it with a garden hose. Use a full stray nozzle. A pressure nozzle may be too strong and will cause unnecessary wear on the pleated folds. When spraying, start at the top of the cartridge.

Step 3. Work your way straight down the cartridge to work the debris down and out the bottom of the pool filter cartridge.

Step 4. Rotate the filter cartridge to the next section and starting at the top work your way down again to the bottom. Continue rotating until the filter cartridge looks clean. Check inside the folds to make sure all the debris has been removed.

Step 5. Some of the debris will have collected at the bottom. Spend extra time spraying out the bottom.




  1. Products are packed by shrink wrap. It can reduce abrasion when transport.

  2. Products are packed by high quality carton package, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks

Delivery time:  If this kind of product in stock, the product will be send for you 1-7 days after payment. If this kind of products are not in stock in our factory, the product will take about 7-25 days to produce.

Shipping: Maritime; Railway; Air(DHL/UPS/TNT/FEDEX)

    No Review