Polypropylene Melt blown Cartridge with Embossing Surface

Group PP melt blown filter
Min. Order 500 piece
Terms of Payment L/C, Western Union, T/T, Paypal
Update Time 2017-11-02
Item specifics
MaterialPolypropylene
Micron Rate0.5,1,5,10,25,50,75,100,150,200Micron
Length10”,20”
Operating Temp.4-52℃
Max. Operating Pressure60psi
Max. Flow4.5GPM (1.5-2kg/Cm2)
End CapsPolypropylene
O-Rings/GasketsBuna, EPDM, Silicone, Viton®, Polyfoam
  • Description
  • Product review

Polypropylene Melt blown Cartridge with Embossing Surface

Introduction:

 

Using 100% Good Grade Polypropylene (Pp) As Material, the filter contains no wetting agents, solvent, antistatic agents or binders. By special production technology to control the diameter of pp fibers, the micron rate of the filter is controlled well. Removing efficiency can reach to 99%. KTMT PP Melt Blown Filter Has 3-Layer. The surface layer of the filter is designed to be low density to assure the high dirt-Holding capability, while the inner layer Is higher density to keep the accurate filtration ability to small particles.

 

Specification:

 

Material

Polypropylene

OD:

2.5”

ID:

1.1”

Micron Rate

0.5,1,5,10,25,50,75,100,150,200Micron

Length

10”,20”

Operating Temp.

4-52℃

Max. Operating Pressure

60psi

Max. Flow

4.5GPM (1.5-2kg/Cm2)

Filtration Life

3-5 months/4500G 

*Depends on water quality and level of contaminants

End Caps

Polypropylene

O-Rings/Gaskets

Buna, EPDM, Silicone, Viton®, Polyfoam

Efficiency

1-3 Micron: 95%,5-100 Micron: 99%

 

Feature:


Controlled fiber diameter and density maximizes removal efficiency and ensures consistent performance

• Excellent compatibility with a wide range of chemicals

• Easy cartridge incineration and disposal

• All polypropylene construction

• All end configurations available (glued or thermally-bonded)

• Resists contaminant unloading, even at elevated differential pressures

• Grooved exterior increases surface area

 

Application:

 

l  Pre-treatment of drinking water system

l  Oil removal industry

l  Food and beverages

l  Photographic industry

l  Pharmacy industry

l  Pre-treatment of industrial DI&RO system

l  Low viscosity fluids

    No Review